Panel Description
FRONT PANEL
No.
Name
1
Power LED
2
Status LED
Input
3
Source
LEDs
4
Pairing
5
Reset
Hall Technologies
January 20, 2023
Description
Solid yellow LED when the HT-RANGER is powered on.
Solid yellow LED: The HT-RANGER is outputting at least one video source.
•
Blinking yellow LED: The HT-RANGER is in standby mode
•
Off: The HT-RANGER is displaying the Guide Screen.
•
Solid yellow LED: The corresponding video input source signal is connected and is
•
being displayed.
Fast blinking yellow LED: The corresponding video input source signal is connected
•
but the source is not being displayed.
Slow blinking yellow LED: The corresponding video input source signal is being output
•
but the signal is not valid.
Off: The switcher is in standby mode, or the corresponding video input source signal
•
is not connected.
USB-C port for connecting to HT-Voyager for pairing.
Reset button.
When the switcher is powered on, use a pointed stylus to hold down this button for five
or more seconds and then release. The HT-RANGER will reboot and restore to its factory
defaults.
Page 5 of 31