Table of Contents
Advertisement
4. Click the HT-RANGER device name in the search results.
5. The HT-RANGER device displays the PC's content once your PC is connected to the device
successfully.
6. To disconnect PC from the device: click Disconnect.
Note:
Ÿ The icon and interface of the Miracast function may vary on different computers.
Ÿ Some Windows 10 computers may fail to perform screen mirroring with Miracast due to
compatibility issues.
Tip: Both the AirPlay mirroring and Miracast support access code. If you see the PIN entry window
appears on your devices, input the access code which can be obtained through OSD. (See "OSD" section
for more information.)
4. Screen mirroring over HT-VOYAGER
HT-VOYAGER allows you to share your laptop's content on the display screen without installing any
additional software. Simply plug in the HT-Voyager into USB-C and click the button. For more information,
see the user guide of HT-VOYAGER.
Steps to share laptop's screen on the display using HT-Voyager:
Pair the HT-VOYAGER with the switcher. Connect the HT-VOYAGER to the PAIRING port of the
1.
switcher for pairing. Once pairing is completed, "Pairing successful" appears on the display
screen. (This will take around 20 seconds to complete.)
Connect the HT-VOYAGER to a laptop. The HT-VOYAGER will start running when connected
2.
into a laptop and will automatically connect to the switcher's soft AP. Once the HT-VOYAGER
connects to the switcher successfully, the LED stops blinking and will be solid white.
To mirror the laptop, press the HT-VOYAGER's projecting button. To display laptop's screen in
3.
full screen, press and hold the button for at least 5 seconds.
Note: For more information about HT-Voyager, see the HT-Voyager user guide.
Hall Technologies
January 20, 2023
Projecting Button
Page 12 of 31
Advertisement
Table of Contents
