Firmware Upgrade - Hall Technologies HT-RANGER User Manual

Firmware Upgrade

The switcher supports a firmware upgrade using the Web UI and through the USB-A port on rear panel.
To upgrade the firmware through the Web UI, see
To upgrade the firmware through the USB-A port on rear panel, perform the following:
Name the upgrade file package "HT-RANGER-update.zip".
1.
Create a new folder named "upgrade" under the root directory of a FAT32 or NTFS USB Drive. Place
2.
the upgrade file in this folder.
Connect the USB Drive to either of the switcher's USB-A ports. It will take about 1 minute for the
3.
switcher to read the USB Drive. If the switcher detects the upgrade file is a newer version, it will
start to upgrade automatically. When the upgrade process is complete, the switcher will reboot.
Note:
Before connecting USB Drive to the switcher, we recommend that you remove the USB-C source
Ÿ
from the switcher's USB-C port.
Do not disconnect power to the HT-RANGER during the upgrade process.
Ÿ
If the switcher detects the upgrade file is not a newer version, it will not start the upgrade.
Ÿ
Hall Technologies January 20, 2023
Firmware section.
Page 27 of 31