Output - Hall Technologies HT-RANGER User Manual

OUTPUT

UI Element
Output timing
Output HDCP
Support
Auto Standby (Minute,
ranges from 0 to 60, set to 0
for deactivation)
Refresh
Apply
Hall Technologies January 20, 2023
Description
Set the output resolution for HDMI Out. Two operation methods are offered.
Auto: select to output the maximum resolution supported by display based on the
Ÿ
display's EDID. E.g. If display supports up to 4K@60Hz, the device outputs 4K@60Hz.
Resolution range list: select a desired output resolution from the drop-down menu to
Ÿ
output this fixed resolution.
By default, it's set as Auto.
Set the HDCP capability for HDMI Out and HDBT Out.
Follow: Set the output HDCP of HDMI Out to follow the HDCP capability of the video
Ÿ
input.
HDCP 1.4: Set the output HDCP of HDMI Out to HDCP 1.4.
Ÿ
By default it is set as Follow.
Set a period of time that remains before the countdown timer begins for auto standby.
•
For example, when the current input is Guide Screen, 1 minute means if there's no
signal present at the device in 1 minute, the countdown timer for device standby
begins; when the timer ticks to zero, the device enters standby mode.
Note: If the connected display doesn't support CEC or isn't correctly set with RS232
commands, the word "Standby" appears in the middle of the Guide Screen.
•
If it's set to 0 minute, it means this function is disabled and you cannot set the device
to standby mode.
By default, auto standby is set as 1 minute.
Click to refresh to the latest status of the output timing.
Click to apply setting changes.
Page 21 of 31