Table of Contents
Advertisement
Web GUI
The Web UI designed for this switcher allows for basic controls and device settings. This Web UI can be
accessed through a modern browser, e.g. Chrome, Safari, Firefox, IE10+, etc.
To get access the Web UI:
Connect the LAN port of the switcher to a local area network. Ensure there's a DHCP server in the
1.
network so that the device can obtain a valid IP address. (If there is no DHCP server the switcher
will revert to a 169.254.x.x address which you can find on the OSD. Use this to change the switcher
IP to a static IP address and set your own.)
Connect the PC to the same network as the switcher.
2.
Input the switcher's IP address in the browser and press Enter, the following window pops up. (See
3.
OSD
section to easily view the IP address)
Input the password (default password: admin) and click Login to enter the main page.
4.
Hall Technologies
January 20, 2023
Page 16 of 31
Advertisement
Table of Contents
