Installation And Wiring; Installation - Hall Technologies HT-RANGER User Manual

Installation and Wiring

INSTALLATION

Note: Before installation, please ensure the device is disconnected from the power source.
Attaching Antennas
Attach the included antenna to the threaded connector and screw it in clockwise.
1.
Repeat the above step for the other antenna.
2.
Attaching Installation Brackets
Attach the included installation bracket to the enclosure using the screws provided.
1.
Repeat the step for the other side of the device.
2.
Attach the brackets to the desired install surface (installation hardware not included).
3.
Hall Technologies January 20, 2023 Page 7 of 31