Table of Contents
Advertisement
GUIDE SCREEN
The device uses a Guide Screen to convey the basic connection instructions for users. The Guide Screen
can be personalized to allow custom connection instructions on the device's Web UI page.
When all video sources are disconnected from the device, the following Guide Screen appears on the
display screen automatically:
Guide
Note:
This Guide Screen picture can be changed through the Web UI setting. Please refer to
•
section for more information.
By default, if the Guide Screen is being displayed for 60 seconds with no wireless casting connectivity,
•
a countdown timer with the time period of 60 seconds will appear. When the timer ticks to zero, if
the connected display is CEC-supported, it will enter standby mode.
The Guide Screen is accessible in the following cases:
Automatic switching: by disconnecting all video sources from the switcher, the
•
Screen appears automatically.
Manual switching:
•
Through Web UI page. For more information, see State & Switch section.
è
Send API command through telnet to the switcher to show the Guide Screen. For more
è
information, see the separate HT-RANGER API documentation.
OSD
The switcher supports OSD (On Screen Display) to convey device basic information, including the video
source's information, access code, device name, IP address, and Wi-Fi password. The following are two
different OSD examples.
Hall Technologies
January 20, 2023
HT-RANGER
UAV-G709-000
No Access Code
IP: 192.168.9.46
WiFi Pwd:12345678
Guide Screen
Guide
Page 14 of 31
Advertisement
Table of Contents
