Dual View Display; Automatic Signal Switching - Hall Technologies HT-RANGER User Manual

DUAL VIEW DISPLAY

By default, the switcher allows up to two video sources to be displayed on a single screen.
The source combinations and switching sequence for dual view is as follows:
1. Only one hard-wired video source (HDMI or USB-C) can be displayed in dual view
Screen mirroring source + Screen mirroring source: √
Screen mirroring source + HDMI In source: √
Screen mirroring source + USB-C In source: √
HDMI In source + USB-C In source: X
Note: To learn more about screen mirroring source, see Screen Mirroring section.
2. If two wireless video sources are being displayed in dual view and a third video source is
connected the latest connected video input source will replace the source that has been
connected longer to the HT-RANGER.
3. If one of the dual video sources is a hard-wired source (HDMI or USB-C) and a second wireless
video source is connected, the or the latest connected source will replace the hard-wired video
source.
Note: The Dual View Display function can be disabled by API commands. For more information, see the
separate HT-RANGER API documentation.

AUTOMATIC SIGNAL SWITCHING

The automatic signal switching function allows for quick and easy video switching without the need for
user control. By default, the automatic signal switching function is set as enabled.
1. When there is only one video input source connected, the switcher will automatically output and
display it on the screen.
2. When a third video input source is connected and the two video sources are being displayed in
dual view, this latest input source will replace either of the sources being displayed. For more
information, see the switching mechanism in the Dual View Display section.
3. If all video sources are removed, the switcher will output the Guide Screen picture.
The switcher also offers the following manual methods to switch to a specific video source:
1. Using web UI.
2. Using API commands. For more information, please see the separate API documentation.
Hall Technologies January 20, 2023
1
1
2
Page 13 of 31