4.0 Front and Rear panel
Figure 4 - Sender Front and Rear Panels
Figure 5- Receiver Front and Rear Panel
MENU: To view or change the system Configuration
NAV Keys: Navigation keys
RESET (RST): Press and release to reboot (same as power cycle). Press and
hold for 10 seconds to restore factory defaults.
5V DC: Plug the supplied 5V DC power supply to the unit, if PoE is
unavailable.
HDMI OUT: This is a local HDMI loop out for a local display.
HDMI IN: Connect to the HDMI source such as a DVD or Blu-ray player.
IR OUT: Connect to the supplied IR emitter cable.
AUDIO OUT: HDMI audio extraction
RS-232: Connect to PC/Serial Controller or displays with phoenix adaptor
1000BT: Connect to a gigabit network router/switch or a Receiver using
CAT5e/6 cable. The green LINK LED illuminates to show the link from
Receiver is established.
IR IN: Connect the supplied IR detector
10
© Copyright 2019 Hall Technologies