Screen Mirroring Over Airplay (For Apple Devices) - Hall Technologies HT-RANGER User Manual

1. Screen mirroring over airplay
Using an iPhone 8 (iOS 15.2) for example:
1. Connect your iPhone to the soft AP of the device.
ð Soft AP SSID: this should be the same as the device name which can be obtained from the
OSD at the upper right corner of the display screen. By default, it is set as HT-RANGER.
ð Password: this password can be set through Web UI or Telnet API and can be obtained from
the OSD at the bottom right corner of the display screen. By default, it is set as 12345678.
2. Slide up from the bottom of the iPhone's screen to show the control center. Click Screen
Mirroring and choose the device name in the pop-up list.
3. HT-RANGER now displays your iPhone's screen.
4. To disconnect iPhone from the device: click "Stop Mirroring". The display stops displaying
your iPhone's screen.
Hall Technologies January 20, 2023 Page 9 of 31