Table of Contents
Advertisement
Available languages
Available languages
For the dimensions of the plates and
the concrete base, use a qualified
technician.
A
A
B
74
6
PREPARING THE PLACE OF
INSTALLATION
6.1
General considerations
The following paragraphs contain some guidelines
to be followed to obtain the maximum efficiency of
the product purchased and to ensure safe operation.
The following indications are however subject to
compliance with any possible national, regional and
municipal laws and regulations in force in the country
where the appliance is installed.
For Italy, installation must be carried out by qualified
personnel in compliance with the EN 10683 standard.
6.2
Safety Precautions
10 mm
The operations for assembly and disassembly of the
appliance are reserved for specialist technicians only.
It is recommended to be sure of their qualifications
and their actual capacity.
For Italy, these technicians must be in
possession of the letter "C" qualification
Fig. 14
issued by the chamber of commerce
based on the Ministerial Decree. 37/08.
6.3
Place of installation
For the minimum distances that must be respected
when positioning the appliance with respect to flam-
mable materials and objects, refer to the instructions
in Fig. 16.
Y2
X1
Fig. 15
Z
X2
Y1
Fig. 16
004778982 - 09/08/2022
Advertisement
Table of Contents
