Safety Warning; Warnings For The Installer - Palazzetti ECOFIRE VIVIENNE User Manual

2

SAFETY WARNING

2.1

Warnings for the installer

Observe the prescriptions contained in
this manual.
The instructions for assembly
and disassembly of the appli-
ance are reserved for specialist
technicians only.
The installation, use and maintenance
of the product must be in accordance
with the manufacturer's instructions
and in compliance with the regulations.
Failure to comply with the instructions
and any incorrect operations may give
rise to hazardous situations, damage to
property, animals, health problems or
malfunctioning.
Installation, electrical connection, oper-
ational testing and maintenance must
be carried out exclusively by authorised
and qualified personnel.
The installation and maintenance of the
product must be carried out exclusively
by qualified personnel with suitable
knowledge of the product itself. Use
only original spare parts recommended
by the manufacturer.
Responsibility for the works carried out
in the location of the appliance is, and
remains, with the user; the latter is also
responsible for carrying out the checks
relating to the proposed installation
solutions.
The installer must comply with all
local, national and European safety
regulations.
The appliance must be installed on floors
with adequate load bearing capacity.
Check that the chimney flue
and air inlet set-ups conform to
the type of installation.
Do not carry out on-the-fly electrical
56
connections with temporary or uninsu-
lated cables.
Check that the earthing of the electrical
system is efficient.
Before starting the assembly or disas-
sembly phases of the appliance, the in-
staller must observe the safety precau-
tions required by law and the following
indications in particular:
• do not operate in adverse conditions;
• they must operate in perfect psy-
chophysical conditions and must
check that the personal protective
equipment is intact and functioning
perfectly;
• they must wear gloves and safety
shoes;
• they must use tools with electrical
insulation;
• they must make sure that the area
used during assembly/dismantling is
free from obstacles.
The product must only be installed in
rooms that are not at risk of fire and
equipped with all the necessary services
including air and electrical supplies and
flue gas exhausts.
Evaluate the static conditions of the sur-
face bearing the weight of the product
and provide suitable insulation if it is
composed of flammable materials (e.g.
wood, carpet, plastic).
Live electrical parts: power the prod-
uct only once it has been completely
assembled.
004778982 - 09/08/2022