Configuration 1 - Room Probe - Palazzetti ECOFIRE VIVIENNE User Manual

8.1

Configuration 1 - Room probe

Configuration 1 is the default configura-
tion for this appliance. In this case it is
not necessary to make any changes.
The appliance leaves the factory with the room
probe already connected to the terminals and
positioned on the rear panel (Fig. 51).
It is possible to place the room probe in another
place to detect the desired room temperature.
Set configuration 1 to switch the appliance on and
off either manually or according to a program.
004778982 - 09/08/2022
ITALIANO ENGLISH
6
Room temperature
probe
1
6
5
4
3
2
1
The appliance modulates the power according to
the room temperature read by the room probe
placed on the stove itself.
You can set the "Eco-mode" function to
have the appliance switch off or on again
according to the room temperature set.
The antifreeze function can also be set in this
configuration.
It is important to check that the appli-
ance is set to Configuration 1.
This configuration can also be used to switch
the appliance on and off manually or in a pro-
grammed way (with the Timer function active).
FRANÇAIS
T
Fig. 51
91