Guidance And Manufacturer's Declaration - Electromagnetic Emissions - mectron compact piezo LED Installation Manual

compact piezo LeD
6.1 Electromagnetic Compatibility IEC/EN 60601-1-2
WARNING: Contraindications.
Interference with other equipment
even if complying with the standard iec
60601-1-2, compact piezo LED may interfere
with other devices in the vicinity.
WARNING: portable and mobile radio
communication appliances may affect proper
device operation.
WARNING: Contraindications.
Interference from other equipment. an
electrical scalpel or other electro-surgical
units near the compact piezo LeD device may
interfere with its correct operation.
6.1.1 Guidance and Manufacturer's Declaration - Electromagnetic
Emissions
compact piezo LED is intended for use in the electromagnetic environment specified below. The
customer or user of compact piezo LeD should ensure that it is used in such an environment.
Emissions Test
RF emissions
ciSpR 11
RF emissions
ciSpR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
26
WARNING: The device requires specific
emc precautions and must be installed
and commissioned according to the emc
information provided in this chapter.
manufacturer of the dental chair on which
the compact piezo LeD has been installed
is responsible for the compliance of the
product and of the entire system to the IEC/
EN 60601-1 in law.
Compliance Electromagnetic environment – Guidance
compact piezo LeD only uses RF energy for
internal function. Therefore, its FR emissions
Group 1 are very low and are not likely to cause
any interference with nearby electronic
equipment.
class B
compact piezo LeD is suitable for use in
all
class a establishments and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
complies
domestic purposes.
WARNING: the technician or the
establishments, including domestic