Table of Contents
Advertisement
Diagnostics and Troubleshooting
User Manual
3
Diagnostics and Troubleshooting
In This Chapter
Diagnostics............................................................................................ 26
Check the Ethernet cable ...................................................................... 26
LED display ........................................................................................... 27
Retrieve the default password ............................................................... 27
Troubleshoot RLX-IH Browser error messages..................................... 28
Troubleshoot missing radios.................................................................. 29
Improve signal quality............................................................................ 29
Use the program's diagnostic and signal strength settings at the top of the Radio
Settings window to make sure the network is working properly.
Signal Strength graph: This setting graphically shows the radio's signal
strength. The graph will show the word Master if a master radio is selected.
The graph will show the word Scanning if the radio is scanning to find another
radio to which to connect. If the radio is not connected to a network and not
currently scanning, the graph will show the words Not connected.
Update readings every: If you want to update the diagnostic readings
according to a particular interval, specify the interval (in seconds) in this field.
Read-only fields that appear with the diagnostic settings.
You can perform the following troubleshooting routines:
Check the Ethernet cable (page 26)
Retrieve the default password
For more troubleshooting information, go to the ProSoft Technology web site at
http://www.prosoft-technology.com
ProSoft Technology, Inc.
May 18, 2009
RLXIB-IHW-66 ♦ 802.11a, b, g
Industrial Hotspot
Page 25 of 109
Advertisement
Table of Contents
Need help?
Do you have a question about the RadioLinx RLXIB-IHW-66 and is the answer not in the manual?
Questions and answers