ProSoft Technology RadioLinx RLXIB-IHW-66 User Manual page 16

RLXIB-IHW-66 ♦ 802.11a, b, g
Industrial Hotspot
1.6.4 Assign a Temporary IP Address
You need the IP address to log into the Radio Configuration/Diagnostic Utility
and configure the radio settings. If the radio is connected to a network with a
DHCP server, the radio may already have an IP address assigned to it.
If a DHCP server is not available, or if you prefer to assign a static IP address,
you can enter a temporary IP here. You will use the Radio Configuration /
Diagnostic Utility (page 31) to assign a permanent IP address.
To assign a temporary IP Address
1 In IH Browser, click to select the radio.
Tip: If a radio listing does not appear in the window, open the File menu and choose Scan. If you
still do not see a radio listing, refer to Diagnostics and troubleshooting in the RLXIB User Guide.
2 Open the Operations menu, and choose Assign IP. This action opens the
Assign Temporary IP Address dialog box.
3 Accept the dynamically assigned address, and then click OK.
For information, see Radio Access settings (page 55).
Page 16 of 109
Start Here
User Manual
ProSoft Technology, Inc.
May 18, 2009