ProSoft Technology RadioLinx RLXIB-IHW-66 User Manual page 57

802.11a, b, g industrial hotspot
Hide thumbs Also See for RadioLinx RLXIB-IHW-66:
Table of Contents

Advertisement

Radio Configuration / Diagnostic Utility
User Manual
Field
Allow IP
Community String
Permission
Read only
Read/Write
Save
Cancel
The RLXIB SNMP agent supports SNMP protocol version 1.4 and 2 MIBs:
RFC12133-MIB (partial; internet.mgmt.MIB-2.system, .interfaces, .snmp)
ROMAP-MIB (included on the CD; internet.private.enterprises.romap)
It also supports a selection of standard SNMP traps, including Cold Start, which
is sent when the radio initializes.
4.4.2 Change password
This configuration page opens when you click the Login Password button on the
Radio Configuration form.
Field
Old
New
Repeat
Save
Cancel
You can enter any alphanumeric value between one and 31 characters. The
password is case-sensitive.
If you forget your password, you will be unable to change the radio settings. To
get the default password again, see Troubleshooting.
ProSoft Technology, Inc.
May 18, 2009
Description
Select this setting to restrict access to an SNMP manager with a
particular IP address, then enter the IP address in the Allow IP field.
Enter a "community string" (essentially a password) that a manager
must use to access the radio's SNMP agent.
Select the permission level to assign to this radio.
An SNMP Agent can view but cannot modify radio settings.
An SNMP Agent can view and modify radio settings.
Saves your changes and updates the radio configuration.
Discards your changes without updating the radio configuration.
Description
Enter the current password in this field. The default password is
"password" (lower case, no quotes). This entry must exactly match the
current password, otherwise the change will be rejected.
Enter the new password in this field. Passwords are case sensitive.
Confirm the new password in this field. This entry must exactly match
the password you entered in the "New" field, otherwise the change will
be rejected.
Saves your changes and updates the radio configuration.
Discards your changes without updating the radio configuration.
RLXIB-IHW-66 ♦ 802.11a, b, g
Industrial Hotspot
Page 57 of 109

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RadioLinx RLXIB-IHW-66 and is the answer not in the manual?

Questions and answers

Table of Contents