Advertisement
Model:
Streamline NX v2
Apply "the bug fix program" to GlobalScan NX or Streamline NX PC application/AdminTool
Please perform the following procedure upon the satisfaction of all of the following conditions. If all of the
following conditions are not met, the following setup procedure is not required.
Provision:
Please perform the procedure upon the satisfaction of all of the following conditions.
1. GlobalScan is Server edition.
Note: This condition is applicable only for GlobalScan NX.
2. You use the following 64-bit OS:
Windows Server 2008 R2, Windows Server 2012
Note: An environment with GlobalScan NX (32-bit) or Streamline NX (32-bit) installed to a 64-bit OS
does not meet these conditions.
Preparation:
Please obtain the bug fix program.
File name: ImageCorrectionPatch.zip
Apply the patch to GlobalScan NX or Streamline NX server application/AdminTool:
1.
Please confirm that the server has Globalscan NX or Streamline NX installed.
2.
Open the GlobalScan NX AdminTool or Scan and Fax Manager and open [Maintenance Settings] ->
[System Control] -> [Switch Delivery Service Status], and stop the delivery service.
Open the service list on Windows OS and stop "GlobalScan Service" or "Streamline NX Scan and Fax
3.
T
B
echnical
ulletin
Date:
5-Dec-13
PAGE: 11/17
No.: RD639012
Advertisement
