Advertisement
Installation
Step1) Access to the Li-MF1 Web Interface.
•
HTTP :http://<DEVICE_IPADDRESS>/
•
HTTPS :https://<DEVICE_IPADDRESS>/
Note: To confirm the Li-MF1's IP address, go to the device and manually print out the Network
Setup Page from Menus
Step2) Select Settings
Step3) Press the
Install
Step4) Confirm that installation succeeded.
Step5) Press the
Install
Step6) Confirm that installation succeeded.
Configuration
The configuration of AA Manager and SP Manager can be performed via the Li-MF1 Web UI. The
interface is almost the same as the standard Streamline NX, but the available settings are based
on Streamline NX v1.2.
To open AA Manager or SP Manager, select Application
‣
Application
Streamline NX SP Manager from the Li-MF1 web UI. Do not simply left-click the link
to open in the frame layout because AA Manager and SP Manager is not designed to be displayed
within Li-MF1 web UI's frames. Use "Open in New Tab" or "Open in New Window" to display AA
Manager and SP Manager in a full window.
This section describes the basic settings required to connect to Authentication and Accounting
Manager and Secure Print Manager. For other settings, please refer to the Streamline NX
Administrator's Guide because the settings are the same as the standard SDK applications.
‣
‣
Reports
Network Setup Page.
‣
Embedded Solutions.
button to upload the Streamline NX AA Manager Install File (*.fls).
button to upload the Streamline NX SP Manager Install File (*.fls).
‣
Streamline NX AA Manager or
PAGE: 4/7
Advertisement
