Advertisement
PAGE: 2/4
Home Button:
Automatically enabled when SLNX and a supporting version of the System/Copy FW is installed.
Additionally, the Operation Panel and Language Install FW must be updated in order to display the
button's label correctly.
NOTE: In E09A or earlier models, a software button will be displayed, as shown above. 11A or
later models have a hardware "Home" button which provides the same functionality.
Guest Login Button:
This button allows user to login to the device without the user's credentials, and the user is allowed
to use only the built-in copier application. To enable the button, a supporting version of the System
FW and device Java VM is required. If a non-supported version is installed, the button will be
displayed but will not move to the copy application.
Advertisement
