Advertisement
AA Manager Configuration
Step1) Input a username and password. The default is the same as the standard SDK application.
Username: admin
Password: password
Step2) Open AAM's Configuration
and Accounting Manager's address and SSL port.
SP Manager Configuration
Step1) Input a username and password. The default is the same as the standard SDK application.
Username: admin
Password: password
Step2) Open SPM's System Configuration and input the corresponding Secure Print Manager's
address and port.
Step3) A device reboot is required in order to apply the configuration. However, this can be done
after section 5-3, Li-MF1 Configuration, is completed.
Li-MF1 Configuration
Close the Built-in Printer Port (9100)
This setting is for prohibiting normal prints using port 9100.
Step 1) Select Settings
Step 2) Configure as follows:
•
[TCP 9100 (Raw Print)]: Unchecked
•
[TCP 9400 (Enhanced Print)]: Checked
‣
Server Settings and input the corresponding Authentication
‣
‣
Security
TCP/IP Port Access on the Li-MF1's web UI.
PAGE: 5/7
Advertisement
