Figure 30: Loopback Test Result - Advantech FWA-T011 Getting Started Manual

For a specific port, set the IP address with netmask value and configure it as source or
destination port
Usage: set <portlist> size <value>
Set transmit packet size for a specific port
Usage: enable/disable mac_from_arp
Set the option to get MAC from an ARP request
Step 10: Start
Pktgen > start all
Pktgen > cls
Finally, users shall get running test result as below:

Figure 30: Loopback Test Result

Step 11: Type 'quit' in Pktgen CLI to close Pktgen
Pktgen > quit
Page 44
Copyright 2017. All rights reserved. Advantech Co. Ltd.