Pairing When The Expand Mesh Is Turned Off; Pairing When The Expand Mesh Is Turned On - Sena EXPAND MESH Manual

3 PaIrIng tHE HEadsEt wItH OtHEr BluEtOOtH dEvIcEs
2. Select Expand Mesh in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000.

3.1.2 Pairing When the Expand Mesh is Turned Off

1. While the headset is off, press and hold the Center Button and the
(+) Button until the LED flashes red and blue alternately and you hear
a voice prompt, "Phone pairing."
=
2. Select Expand Mesh in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000.

3.1.3 Pairing When the Expand Mesh is Turned On

1. While the headset is on, press and hold the Center Button for
5 seconds.
=
2. Select Expand Mesh in the list of
Bluetooth devices detected. If your
mobile phone asks for a PIN, enter
0000.
HOLD
HOLD
5s
Expand Mesh Bluetooth
Bluetooth
Expand Mesh
Pi
Device B
Blinking
"Phone pairing"
Bluetooth
Expand Mesh
Pi
Device B
Blinking
"Phone pairing"
Bluetooth
Expand Mesh
Pi
Device B
Headset with Mesh Intercom™ | 12
®