PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES 4.1 Phone Pairing 4.1.1 Initially Pairing the pi 4.1.2 Pairing When the pi Is Turned Off 4.1.3 Pairing When the pi Is Turned On 4.2 Second Mobile Phone Pairing - Second Mobile Phone and GPS...
Page 3
TABLE OF CONTENTS CONTINUED MOBILE PHONE USAGE 5.1 Making and Answering Calls 5.2 Bluetooth Stereo Music BLUETOOTH INTERCOM 6.1 Intercom Pairing 6.1.1 Using the Smart Intercom Pairing (SIP) 6.1.2 Using the Button 6.2 Two-Way Intercom 6.2.1 HD Intercom UNIVERSAL INTERCOM 7.1 Universal Intercom Pairing 7.2 Two-Way Universal Intercom FUNCTION PRIORITY...
Two-Way Intercom Intercom up to 400 m (0.2 mi)* Advanced Noise Control™ * in open terrain 1.2 Product Details (+) Button LED Status (–) Button Microphone DC Power Charging & Firmware Upgrade Port pi Bluetooth Communication Headset for Helmets | 4...
1 ABOUT pi Left Speaker Right Speaker 1.3 Package Contents Headset USB Power & Data Cable (USB-C) pi Bluetooth Communication Headset for Helmets | 5...
Hide the cable under the inner pad in the front of the helmet. ③ Adjust the headset upward or downward so that the speakers are ④ facing your ears. Note: The SENA logo will appear as above after proper installation. pi Bluetooth Communication Headset for Helmets | 6...
3. GETTING STARTED 3.1 Downloadable Sena Software 3.1.1 Sena Utility App By simply pairing your phone with your headset, you can use the Sena Utility App for quicker, easier set up and management. Sena Utility • Download Sena Utility App on Google Play Store Store.
• Please make sure to take off your headset while charging. The headset automatically turns off during charging. • Any 3rd party USB charger can be used with Sena products if the charger is approved by either the FCC, CE, IC or other locally approved agencies that Sena accepts.
3.5 Volume Adjustment Volume is set and maintained independently at different levels for each audio source, even when the headset is rebooted. Volume Up/Down • Tap the (+) Button or the (-) Button. pi Bluetooth Communication Headset for Helmets | 9...
Select pi in the list of Bluetooth ② devices detected. Bluetooth Device B Note: • The phone pairing mode lasts for 3 minutes. • To cancel pairing, tap the (+) Button or (-) Button. pi Bluetooth Communication Headset for Helmets | 10...
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES 4.1.2 Pairing When the pi Is Turned Off While the headset is ① Blinking off, press and hold the (+) Button and the (-) Button “Phone Pairing” for 5 seconds. Select pi in the list of Bluetooth ②...
① “Configuration menu” (+) Button for 10 second. Tap the (+) Button. ② Blinking “ Second mobile phone pairing” Select pi in the list of Bluetooth ③ devices detected. Bluetooth Device B pi Bluetooth Communication Headset for Helmets | 12...
• Press and hold the (+) Button for 1 second. Track Forward • Press and hold the (+) Button for 2 seconds. Track Backward • Press and hold the (-) Button for 2 seconds. pi Bluetooth Communication Headset for Helmets | 13...
6.1.1 Using the Smart Intercom Pairing (SIP) SIP allows you to quickly pair with your friends for intercom communication by scanning the QR code on the Sena Utility App without remembering the button operation. Pair the mobile phone with the headset.
(B) is paired with ⑥ you (A) correctly. Note: The Smart Intercom Pairing (SIP) is not compatible with Sena products that use Bluetooth 3.0 or below. 6.1.2 Using the Button Press and hold the (-) Button ①...
Universal Intercom allows you to have Two-way intercom conversations with users of non-Sena Bluetooth headsets. Non-Sena Bluetooth headset can be connected to the Sena headset if they support the Bluetooth Hands-Free Profile (HFP). You can pair the headset with only one non-Sena headset at a time.
8. FUNCTION PRIORITY The headset operates in the following order of priority: (highest) Mobile phone Bluetooth Intercom (lowest) Bluetooth stereo music A lower priority function is always interrupted by a higher priority function. pi Bluetooth Communication Headset for Helmets | 17...
Factory Reset Execute Exit Configuration Execute 9.2 Software Configuration Setting You can change the settings of the headset through the Sena Device Manager or the Sena Utility App. Sena Utility Sena Device Manager pi Bluetooth Communication Headset for Helmets | 18...
You can disable voice prompts by software configuration settings, but the following voice prompts are always on. - Headset configuration menu 9.2.3 Advanced Noise Control™ (Always on) The background noise is reduced during an intercom conversation. pi Bluetooth Communication Headset for Helmets | 19...
(+) Button for 10 seconds “Configuration menu” to enter the configuration menu. Tap the (+) Button three ② “Factory Reset” times. Tap the (-) Button to execute “ Headset reset, ③ good-bye” Factory Reset. pi Bluetooth Communication Headset for Helmets | 20...
Page 21
Hero4 allowing for Bluetooth capabilities. The Bluetooth word mark and logos are owned by the ® Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone and iPod touch are registered trademarks of ®...