Sena EXPAND MESH Manual page 26

9 CONFIGURATION SETTING
9.2.1 Headset Language
You can select the device language. The selected language is
maintained even when the headset is rebooted.
9.2.2 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When
you hear a ringtone for an incoming call, you can answer the phone
by saying a word such as "Hello" loudly or by blowing air into the
microphone. VOX Phone is temporarily disabled if you are connected
to intercom. If this feature is disabled, you have to tap the Center
Button to answer an incoming call.
9.2.3 VOX Sensitivity (Default: 3)
VOX Sensitivity can be adjusted depending on your riding environment.
Level 5 is the highest sensitivity setting and level 1 is the lowest.
9.2.4 Intercom-Audio Overlay Sensitivity (Default: 3)
The music will be lowered to play in the background if you talk over the
intercom while the overlaid audio is playing. You can adjust the intercom
sensitivity to activate this background audio mode. Level 1 has the
lowest sensitivity and level 5 has the highest sensitivity.
Note: If your voice is not louder than the sensitivity of the selected
level, the overlaid audio will not be lowered.
9.2.5 Audio Overlay Volume Management (Default: Disable)
The music overlaid audio reduces in volume whenever there is an ongoing
intercom conversation. If Audio Overlay Volume Management is
enabled, the volume level of the overlaid audio will not be reduced during
an intercom conversation.
9.2.6 Voice Prompt (Default: Enable)
You can disable Voice Prompts by software configuration settings, but
the following voice prompts are always on.
- Headset configuration settings menu, battery level indicator, speed
dial
Expand Mesh Bluetooth Headset with Mesh Intercom™ | 26
®