Maserati Levante Owner's Manual page 88

Before Starting
which images to display according to 4
possible settings.
Rear view and top view
2
Rear cross path view
Front cross path view
Front view and top view
In any shift lever condition, when
"Surround View" screen is displayed, a
pop-up message will appear in the
upper part for 5 seconds.
With gear in P (Park), N (Neutral) or D
(Drive) or R (Reverse), the upper right
corner of the screen will show the "X"
key: touch it to go back to the
previous screen of MTC+ display,
before entering in "Controls".
Choose the most suitable setting for
the situation and the manoeuvre you
are performing or going to perform,
by touching the relevant button
present under the images. The button
will highlight and the type of selected
view will appear on each image.
86
In the top view, the vehicle is
represented as it is during the
manoeuvre, therefore any open doors
will be visible in the image (see
example in the figure).
To display also the dynamic lines of the
trajectory you are setting, it is
necessary to set this function by
accessing the "Settings" menu on
MTC+, at "Safety & Driving Assistant"
item. Once this menu is displayed, it is
also possible to set the function that
delays the exit from this screen in
special situations when the gear lever
is in D (Drive) position. For further
information, see "MTC+ Settings" in
section "Dashboard Instruments and
Controls".
WARNING!
Failure to follow the precautions
below might result in serious injury or
even death.
• Drivers must be careful during
manoeuvres also when using the
camera system with surround view.
• Always check carefully the areas
around your vehicle, before
proceeding forward or backward.
• Be sure to always check for any
pedestrians, animals, other vehicles,
obstructions, or blind spots.
• The driver must use the utmost
caution while using the system to
avoid damage to property or
personal injury.