Maserati Levante Owner's Manual page 197

"Sound+Display".
For further details, refer to "Lane
Departure Warning - LDW" in
section "Driving".
• ParkSense (Park Assist)
The park assist system will scan for
objects behind and in front of the
vehicle when the transmission shift
lever is in R (Reverse) and the
vehicle speed is less than 12 km/h
(7.5 mph). The system can be
enabled with "Sound" only,
"Sound+Display", or turned "Off".
See "Park Assist (optional)" in
section "Before Starting" for
further information.
• Front Sensors Active in Drive
If this feature is active, when driver
takes shift lever from P (Park) or N
(Neutral) to D (Drive), front parking
sensors are activated. If this feature
is not active, when driver takes shift
lever from P (park) or N (Neutral) to
D (Driver), front parking sensors are
NOT activated.
• Front ParkSense Volume
When this feature is selected, the
chime volume of front park assist
sensors can be set to "Low",
"Medium" or "High" level.
"Medium" is the default setting.
The system will retain its last known
configuration state through ignition
cycles.
• Rear ParkSense Volume
When this feature is selected, the
chime volume of rear park assist
sensors can be set to "Low",
"Medium" or "High" level.
"Medium" is the default setting.
The system will retain its last known
configuration state through ignition
cycles.
• Tilt Side Mirrors In Reverse
By selecting this feature the outside
side-view mirrors will tilt downward
when the ignition is in RUN position
and the transmission shift lever is in
R (Reverse) position. The mirrors will
move back to their previous
position when the transmission is
shifted out of R (Reverse). The
feature can be set to "On" or "Off".
Dashboard Instruments and Controls
• Auto Folding Side Mirrors
By selecting this feature the power
external mirrors will automatically
fold alfter a lock door request,
performed by key fob RKE
transmitter or by the "Passive
Entry" system.
Power external mirrors will
automatically unfold once the
ignition device is in ACC or RUN
position, only if the last fold
movement has been automatic.
If the mirrors were manually folded
by the switch on the driver's door
panel, before a lock action, they will
need to be manually unfold to
reactivate the automatic behave.
• Blind Spot Alert
When this feature is selected, the
Blind Spot Alert (BSA) feature can
be set to "Off", "Lights" or "Lights
+ Chime" (default mode). When this
feature is activated in "Lights"
mode, the system will only show a
warning light in the outside mirrors.
When "Lights + Chime" mode is
activated, the system will show a
warning light in the outside mirrors
as well as give an audible alert
when the turn signal is on. When
"Off" is selected, the system is
deactivated. For description of this
4
195