Maserati Levante Owner's Manual page 194

Dashboard Instruments and Controls
Display
After pressing the "Display" soft-key
the following mode settings will be
available.
• Display mode
When in this display you can select
one of the auto display settings. To
change mode status, touch and
release the "Manual" or "Auto"
soft-key.
• Display Brightness with Headlights
4
On
When in this display, you can select
the brightness with the headlights
on. Adjust the brightness from level
0 to 10 with the "+" and "–" setting
soft-keys or by selecting any point
on the scale between the "+" and
"–" soft-keys.
• Display Brightness with Headlights
Off
When in this display, you can select
the brightness with the headlights
off. Adjust the brightness as
previously explained.
• Set Language
When in this display, you can select
one language for all display
descriptions, including the trip
functions and the navigation system
192
(if equipped). The available
languages are specific to the target
markets.
• Touchscreen Beep
When in this display, you can turn
on or shut off the sound activated
by pressure of a touchscreen
soft-key.
• Controls Screen Time-Out
When this mode is selected, the
"Controls" screen will remain
displayed for 5 seconds. If this mode
is not selected, the screen will
remain displayed until closed
manually.
• Nav Next Turn Pop-ups in Cluster
By selecting this feature, the next
turn direction will appear on the
instrument cluster along a
programmed route until the desired
destination is reached (see picture).
• AutoShow Smartphone Display
Upon Connection
This feature allows to use the MTC+
display as a projection device
connected via USB port in order to
browse the Apple CarPlay and
Android Auto apps. By setting this
feature, automatic switch from
native screen to projection device
will happen every time you connect
your smartphone. For further details
refer to the "Maserati Touch Control
Plus (MTC+)" guide.
Units
After pressing the "Units" and then
"Custom" soft-key on the touchscreen
you may select between Metric and
Imperial units of measure. Each unit of
measure can be independently
displayed in the TFT Display and in the
navigation system (if equipped). The