Maserati Levante Owner's Manual page 121

Hide thumbs Also See for Levante:
Table of Contents

Advertisement

Instruments and Controls" for further
information.
The function is ability only if the
brightness sensor detects the right
lighting conditions.
To activate this function:
• Shift the multifunction lever onward
.
• Put the headlight switch in "AUTO"
position.
• Enable the "Automatic High Beam"
function on MTC+.
After these steps, the green indicator
on the upper left side of the TFT
display comes on.
NOTE:
Broken, muddy, or obstructed
headlights and taillights of vehicles in
the field of view will cause headlights
to remain on longer (closer to the
vehicle). Also, dirt, film, and other
obstructions on the windshield or
camera lens will cause the system to
function improperly.
If the windshield or Automatic High
Beam headlight control mirror is
replaced, the mirror must be re-aimed
to ensure proper performance. See the
Service Network.
Interior Lights
The interior and external approach
lights turn on and off when
entering/exiting the vehicle (see
"Illuminated Entry/Exit" in section
"Before Starting" for further
information).
To protect the battery, the interior
lights will turn off automatically 10
minutes after the ignition switch has
been shifted to OFF. This occurs if the
interior lights were turned on
manually or by opening a door. The
glove box light, on the dashboard,
shares the same characteristics
excepting the boot and liftgate lights.
Understanding the Vehicle
The backlight brightness of controls
and instruments can be adjusted by
means of the buttons on steering
wheel right-hand side, enter "Vehicle
settings" menu and select "Interior
Lights" sub-menu. To adjust the
backlighting, the vehicle must be
running and the light switch must be
in
position.
Press and release the switch (►) to
display "Backlighting".
Use arrow ▲ or ▼ to scroll the list of
parameters that can be adjusted and
confirm selection by pressing and
releasing switch (►): available options
will be shown on the display. A check
mark will remain next to the
previously-selected item until a new
selection is made.
3
119

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents