Maserati Levante Owner's Manual page 74

Before Starting
NOTE:
Remember that when using a Isofix
Universal child seat, you can only use
approved child seats with the marking
ECE R44 "Isofix Universal" (03 release
2
or post) (see the example in the
figure).
Isofix Universal child restraint systems
are now available. You should never
install Isofix Universal child seats so
that two seats share a common lower
anchorage.
If your child restraints are not Isofix
Universal, install the restraints using
the vehicle's seat belts.
Installing an Isofix Universal Child
Restraint System
Follow the child restraint
manufacturer's instructions provided
with the child restraint system.
72
The lower Isofix anchorages are "U"
metal rings located on the rear seat
where the cushion meets the seatback
and are located just below the symbol
shown in the picture, but are not
visible. You will easily feel them if you
run your finger along the intersection
of the seatback and seat cushion
surfaces.
NOTE:
• To correctly install a child restraint
system on the rear seats, position the
seat back in the less tilted position
(see chapter "Rear seats" in section
"Understanding the Vehicle").
• On the vehicles of Australian market
the top tether strap anchorage
behind the central rear seat should
be used to secure a child restraint
system with the vehicle's seat belts.
Top tether strap anchorages are placed
behind the backrest of the rear seats.
Such anchorages can be reached
pushing down or lifting the foldable
end of the boot compartment cover.
To fix an Isofix Universal Child seat for
weight group 1 proceed as follows.
• Secure the child seat to the "U"
lower metal rings positioned on the
rear seat.