Maserati Levante Owner's Manual page 268

Driving
NOTE:
The CC system must be turned off
when not in use.
5
WARNING!
Never leave the electronic Cruise
Control system on when not in use.
You could accidentally set the system
or cause it to go faster than you want.
Always leave the system off when you
are not using it.
Setting Desired Speed
Turn on the CC function. When the
vehicle has reached the desired speed
(in the example: 100 km/h), push
downward the multifunction switch
(SET -) and release.
266
The green light with below the
desired speed will illuminate on the
instrument cluster display.
Release the accelerator and the vehicle
will operate at the selected speed.
NOTE:
The vehicle should be traveling at a
steady speed and on level ground
before pushing the switch downward.
Pressing the "ON/OFF" button or the
ACC Gap button for 2 seconds (in the
Optional Configuration) or moving the
ignition switch in OFF position erases
the set speed memory.
Changing Speed Setting
When the CC is set, you can increase
cruise speed by pushing upward the
multifunction switch (RES +). Keeping
the switch pressed, the set speed will
continue to increase by 5 unit per time
(5 km/h or 5 mph) until the switch is
released. The new set speed will be
visualized below the green light.
To decrease speed, push downward
the multifunction switch (SET -).
Keeping the switch pushed in the
downward position, the set speed will
continue to decrease by 5 unit per
time (5 km/h or 5 mph) until the switch
is released. Release the switch when
the desired speed is reached, and the
new set speed will be visualized below
the green light.
Pushing the multifunction switch
upward (RES +) or downward (SET -)
once will enable to increase or
decrease the set speed by one unit
(1 km/h or 1 mph).
Each subsequent tap of the
multifunction switch will increase or
decrease the speed by 1 km/h or
1 mph.
Temporary Deactivation
A soft tap on the brake pedal, pressing
the multifunction switch (CANC), or
normal brake pressure while slowing
the vehicle will temporarily deactivate
the CC without erasing the set speed
memory. The white light
appear on the display.
will