Maserati Levante Owner's Manual page 112

Understanding the Vehicle
reverse. The external mirrors will then
return to the original position when
the lever is shifted out of the reverse
position. Each memory set of the
driver's seat (see "Driver Memory Seat
(for versions/markets, where
provided)" chapter in section
"Understanding the Vehicle")
corresponds to a morror tilt position in
3
reverse.
NOTE:
The mirrors tilt in reverse can be
turned on and off using the MTC+
System, refer to "MTC+ Settings" in
section "Dashboard Instruments and
Controls".
Folding Mirrors
The switch for the power folding
mirrors is located between the power
mirror switches.
110
Press the switch once and the mirrors
will fold in; press the switch a second
time to reset the mirrors to the
standard position.
There is a way to make external
mirrors automatically fold/unfold.
• If the function is available, it needs
to be activated by MTC+ (refer to
"MTC+ Settings" in section
"Dashboard Instruments and
Controls").
• If the mirrors are automatically
folded after the last lock action, then
they will automatically unfold when
the ignition device is set on ACC or
RUN position.
• If the mirrors were manually folded
by the switch on the driver's door
panel, before a lock action, they will
need to be manually unfolded to
reactivate the automatic function.
CAUTION!
Never retract or open the mirrors
manually: it could damage the power
mechanism.
Internal Rear-View Mirror
The position of internal rear-view
mirror can be manually adjusted, and
is endowed with an accident-
prevention release system operating in
the event of a collision.
Internal rear-view mirror is
electrochromic (for versions/markets
where provided): this glare function is
automatically deactivated in reverse to
ensure maximum visibility of obstacles.