Cable Specifications; Copper Cable; Fiber Cable - Transition Networks SPOEB1011-100 User Manual

SPOEB10xx-1xx

Cable Specifications

The cable's physical characteristics must meet or exceed IEEE 802.3™
specifications.

Copper cable

Category 5:
(Minimum Requirement)
Gauge
Attenuation
• Straight-through OR crossover twisted-pair cable may be used.
• Shielded twisted-pair (STP) OR unshielded Twisted-pair (UTP) may be used.
• Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .
• RJ-45 Pin-out: Pin 1 = TD+, Pin 2 = TD-, Pin 3 = RD+, Pin 6 = RD-
• Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
Straight-Through Cable
1 1
Twisted Pair #1
2
2
3
3
Twisted Pair #2
6 6
• Do not use flat or silver satin wire.

Fiber cable

Bit Error Rate:
Single mode fiber (recommended):
Multimode fiber (recommended):
Multimode fiber (optional):
SPOEB1011-100
(DC-Powered)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SPOEB1013-100 (DC-Powered)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SPOEB1014-100
(DC-Powered)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
10
24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
24 to 22 AWG
22.0 dB /100m @ 100 MHz
Crossover Cable
1 1
Twisted Pair #1
2 2
3 3
Twisted Pair #2
6 6
<10 -9
9 µm
62.5/125 µm
100/140, 85/140, 50/125 µm
1300 nm multimode
min: -19.0 dBm max: -14.0 dBm
min: -30.0 dBm max: -14.0 dBm
11.0 dB
1300 nm multimode
min: -19.0 dBm max: -14.0 dBm
min: -30.0 dBm max: -14.0 dBm
11.0 dB
1310 nm single mode
min: -15.0 dBm max: -8.0 dBm
min: -31.0 dBm max: -8.0 dBm
16.0 dB
Cable Specifications -- Continued
SPOEB1015-100 (DC-Powered)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SPOEB1016-100 (DC-Powered)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SPOEB1017-100 (DC-Powered)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SPOEB1035-100 (DC-Powered)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
SPOEB1029-100 (DC-Powered)
SPOEB1029-101 (DC-Powered)
Fiber-optic Transmitter Power:
Fiber-optic Receiver Sensitivity:
Link Budget:
The fiber optic transmitters on this device meet Class I Laser safety requirements
per IEC-825/CDRH standards and comply with 21 CFR1040.10 and
21CFR1040.11.
techsupport@transition.com -- Click the "Transition Now" link for a live Web chat.
1310 nm multimode
min: -8.0 dBm max: -2.0 dBm
min: -34.0 dBm max: -7.0 dBm
26.0 dB
1310 nm multimode
min: -5.0 dBm max: -0.0 dBm
min: -34.0 dBm max: -7.0 dBm
29.0 dB
1550 nm single mode
min: -5.0 dBm max: -0.0 dBm
min: -34.0 dBm max: -7.0 dBm
29.0 dB
1310 nm multimode
min: 0.0 dBm max: -5.0 dBm
min: -36.0 dBm max: -3.0 dBm
36.0 dB
1310Tx/1550Rx nm single mode
1550Tx/1310Rx nm single mode
min: -13.0 dBm max: -6.0 dBm
min: -32.0 dBm max: -3.0 dBm
19.0 dB
11