NetModule NB3710 User Manual page 58

This section can be used to configure security-related settings.
Parameter
SSID
Security mode
WPA/WPA2 mixed
mode
WPA cipher
Identity
Passphrase
Force PMF
Hide SSID
Isolate clients
Accounting
The following security modes can be configured:
Parameter
Off
None
WEP
WPA-PSK
WPA-RADIUS
WPA-TLS
NB3710 User Manual 4.0
WLAN Access-Point Configuration
The network name (called SSID)
The desired security mode
WPA2 should be
WPA/WPA2 mixed-mode offers both.
The WPA cipher to be used, the default is to run both
(TKIP and CCMP)
The identity used for WPA-RADIUS and WPA-EAP-TLS
The passphrase used for authentication with WPA-PSK,
otherwise the key passphrase for WPA-EAP-TLS
Enables Protected Management Frames
Hides the SSID
Disables client-to-client communication
Sets accounting profile
WLAN Security Modes
SSID is disabled
No authentication, provides an open network
WEP (is nowadays discouraged)
WPA-PSK (TKIP, CCMP) aka WPA-Personal/Enterprise,
provides password-based authentication
EAP-PEAP/MSCHAPv2, can be used to authenticate
against a remote RADIUS server which can be configured
in chapter 5.8.2
EAP-TLS, performs authentication using certificates which
can be configured in chapter
preferred over WPA1,
5.8.8
running