NetModule NB3710 User Manual page 56

WLAN Configuration
Running in client mode, it is possible to connect to one ore more remote access-points.
The system will switch to the next network in the list in case one goes down and
return to the highest-prioritized network as soon as it comes back. You can perform
a WLAN network scan and pick the settings from the discovered information directly.
The authentication credentials have to be obtained by the operator of the remote access
point.
Parameter
SSID
Security mode
WPA/WPA2 mixed
mode
WPA cipher
Identity
Passphrase
Force PMF
Required signal strength Required signal strength to esablish the connection
NB3710 User Manual 4.0
WLAN Client Configuration
The network name (called SSID)
The desired security mode
WPA2 should be
WPA/WPA2 mixed-mode offers both.
The WPA cipher to be used, the default is to run both
(TKIP and CCMP)
The identity used for WPA-RADIUS and WPA-EAP-TLS
The passphrase used for authentication with WPA-PSK,
otherwise the key passphrase for WPA-EAP-TLS
Enables Protected Management Frames
preferred over WPA1, running