NetModule NB3710 User Manual page 209

Event
mount-media.are
opcua-browse.are
opcua-json.are
opcua-read.are
opcua-write.are
ping-supervision.are
read-config.are
remote-mail.are
scan-mobile.are
scan-wlan.are
send-mail.are
send-sms.are
serial-read.are
serial-readwrite.are
serial-tcp-broadcast.are
serial-tcsetattr.are
serial-udp-server.are
serial-write.are
set-ipsec-route.are
sms-confirm.are
NB3710 User Manual 4.0
Description
This script can be used to mount an USB storage stick.
This script will browse for nodes at a remote OPC-UA
server.
This script polls any temperature nodes of an OPC-UA
server and sends them JSON-encoded to a remote server.
This script will read the node value at a OPC-UA server.
This script will write a new value to a node at a OPC-UA
server.
This script will supervise a specified host.
This script can be used to read a configuration parameter.
This script reads and sends mails from a remote
IMAP/POP3/SMTP server
This script can be used to switch the Mobile LAI according
to available networks
This script can be used to switch the WLAN client network
according to availability
This script will send an E-Mail to the specified address.
This script will send an SMS to the specified phone number.
This script can be used to read messages from the serial
port.
This script will write to and read from the serial port.
This script reads messages coming from the serial port and
forwards them via TCP to remote hosts (and vice versa).
This script can be used to set/get the attributes of the serial
port.
This script reads messages coming from the serial port and
forwards them via UDP to a remote host (and vice versa).
This script can be used to write a message to the serial port.
set route to IPSEC server depending on active WWAN /
WLAN network
This script will send out a message and confirm its delivery.