YASKAWA 1000 Series Installation Manual page 25

◆
Wire Gauges, Tightening Torque, and Crimp Terminals
Wire Gauges and Tightening Torques
■
Wire gauge and torque specifications are listed in
Terminal Screw
Signal Size
A+, A–, B+,
B–, Z+, Z–,
SD, FE, IP, IG
M2
a+, a–, b+,
b–, z+, z–, SG
Crimp Terminals
■
Yaskawa recommends using CRIMPFOX 6 by Phoenix Contact or equivalent crimp
terminals with the specifications listed in
Note: Properly trim wire ends so loose wire ends do not extend from the crimp terminals.
6 mm
d2
d1
L
YASKAWA ELECTRIC TOBP C730600 37C 1000-Series Option PG-X3 Installation Manual
Table 3 Wire Gauges and Tightening Torques
Tightening
Torque
Recomm.
N m
Gauge
(in lb)
mm 2
0.22 to 0.25 0.75
(1.95 to 2.21) (18 AWG)
Table 4
Wire Gauge Phoenix Contact
mm 2
0.25 (24 AWG)
0.34 (22 AWG)
0.5 (20 AWG)
Table 3.
Bare Cable
Applicable
Gauges
mm 2
Stranded wire:
0.25 to 1.0
(24 to 17 AWG)
Solid wire:
0.25 to 1.5
(24 to 16 AWG)
Table 4 for wiring to ensure proper connections.
Crimp Terminal Sizes
Model
AI 0.25 - 6YE 10.5 (13/32)
AI 0.34 - 6TQ 10.5 (13/32)
AI 0.5 - 6WH
5 Installation Procedure
Crimp Terminals
Applicable Recomm.
Gauges Gauge
mm 2 mm
0.5 0.25 to 0.5
(20 AWG) (24 to 20 AWG)
L d1
mm (in) mm (in)
0.8 (1/32)
0.8 (1/32)
14 (9/16) 1.1 (3/64)
Wire
Type
2
Shielded
twisted
pair, etc.
Shielded
cable, etc.
d2
mm (in)
2 (5/64)
2 (5/64)
2.5 (3/32)
25