Keysight Technologies S9106AC-42D Startup Manual page 78

6 Verify Operation
4. Verify IQ Analyzer Mode displays a signal at 10 GHz and –10 dBm.
a. Select Peak Search from the drop-down menu panel (top-right corner).
If there is a signal at 10 GHz of approximately –10 dBm,
RF Out ➃ RF In ➄
RF Transceiver 7 - 15 GHz, and
of the S9106AC-42D are working properly. (The power level is only
approximate because there is loss in the cable being used and this
loss is not being corrected during the measurement.)
74 S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide