Keysight Technologies S9106AC-42D Startup Manual page 77

2. Set the RF Input to 10 GHz; this is RF Transceiver 7 - 15 GHz,
located on the Rugged Front Panel.
3. Set the RF Output to 10 GHz; this is RF Transceiver 7 - 15 GHz,
located on the Rugged Front Panel.
S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide
a. Select Input/Output from the drop-down menu panel (top-right corner),
select Input tab,
select RF Input Port drop-down menu, and select DUT IF IN 1.
b. Select Frequency from the drop-down menu panel (top-right corner),
select Center Frequency entry box, and set it to 10 GHz.
c. Leave all of the other RF Input settings in their preset state.
a. Select Input/Output from the drop-down menu panel (top-right corner),
select RF Source tab,
select RF Output Port drop-down menu, and select DUT IF OUT 1.
b. Set RF Power to –10 dBm, Frequency to 10 GHz, and RF Output to On.
6 Verify Operation
RF In ➄
RF Out ➃
73