6 Verify Operation
4. Verify IQ Analyzer Mode displays a signal at 10 GHz and –10 dBm.
a. Select Peak Search from the drop-down menu panel (top-right corner).
If there is a signal at 10 GHz of approximately –10 dBm,
RF Out ➃
RF In ➄
RF Transceiver 7 - 15 GHz,
and
of the S9106AC-2IF are working properly. (The power level is only
approximate because there is loss in the cable being used and this
loss is not being corrected during the measurement.)
S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide
61