Keysight Technologies S9106AC-42D Startup Manual page 44

4 Install Hardware
Keysight S9106AC-42D 5G FR1 Multi-port Transceiver on page 47
includes:
The S9106AC-42D, four-channel configuration, consists of four transceivers
providing four Tx channels and four Rx channels. All four channels can operate
in the RF frequency range. Two of the four channels can also be used
in the High IF frequency range, with each channel operating in one
frequency range at a time:
This system can be configured for 2x2 or 4x4 MIMO measurements
in the FR1 RF frequency range or 2x2 MIMO measurements
in the High IF frequency range.
40
one S9106AC Base System (PXIe chassis and
four M9410A PXIe VXT Vector Transceivers)
one E7770A Common Interface Unit (CIU) with
two E7770A-HB2 CIU Channel Cards, 7 to 15 GHz High IF
one E7770A-LA2 CIU LO Card
one E7770A-LD2 CIU LO Distribution Card
FR1 RF frequencies ranging from 380 MHz to 6 GHz
or High IF frequencies ranging from 7 to 15 GHz
S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide