Keysight Technologies S9106AC-42D Startup Manual page 35

S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide
INHIBIT/VOLTAGE MON
(Use for remote inhibit and power rail monitoring.)
Connector
10 MHz REF IN and OUT
Connectors, Rear Panel
Frequency Input
Input Signal
Input signal (PXI timing
slot PXI_CLK10_IN)
For additional information, see the Data Sheet for the
Keysight M9019A, 5992-1481EN.
3 Review Hardware
DB-9
For details on use, see the Keysight PXIe
Chassis User Guide (M9019-90003).
BNC (f), 50 Ω, nominal
10 MHz ±100 PPM
100 mVPP to 5 VPP
(square-wave or sine-wave)
5 V or 3.3 V TTL signal
These 10 MHz REF IN and OUT
connectors are for supplying the
PXI_CLK10_IN and OUT signals
from the System Timing Module.
To provide a 10 MHz Clock
to the S9106AC,
see Connectors, 10 MHz Ref In/Out on
the Rugged Front Panel on page 24.
31