S9106Ac-42D: Detailed Steps To Verify Operation; Connect Ac Power Cords & Power On Equipment; Verify X-Apps Controls S9106Ac-42D Rf Ports At 3 Ghz On Page; Verify X-Apps Controls S9106Ac-42D High If Ports At 10 Ghz On Page - Keysight Technologies S9106AC-42D Startup Manual

6. 3 S9106AC-42D: Detailed Steps to Verify Operation

1. Connect AC Power Cords & Power On Equipment on page 67
2. Verify X-Apps Controls S9106AC-42D RF Ports at 3 GHz on page 68
3. Verify X-Apps Controls S9106AC-42D High IF Ports at 10 GHz on page 72
6. 3. 1 Connect AC Power Cords & Power On Equipment
1. Connect an AC Power Cord to the E7770A CIU right-rear panel.
2. Power on the E7770A CIU Rear Mains Switch, located on the right-rear panel.
3. Power on the E7770A CIU AC Power Switch, located on the left-front panel.
4. Connect an AC Power Cord to the S9106AC Base System right-rear panel.
5. Power on the S9106AC-2IF AC Power Switch, located on the left-front panel.
The M9037A PXIe Embedded Controller and the M9300A PXIe Reference are
part of the S9106AC Base System; they both power on and initialize
automatically when the S9106AC Base System is powered on.
S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide
6 Verify Operation
67