Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MRC DFO Series
Summary of Contents for MRC DFO Series
- Page 1 Operation manual for DFO – DFI Series...
- Page 2 General Overview...
- Page 3 Main Temperature Controller Number Description / Function ③ For setting and calling up parameters. ④ To increase the value of digits. ⑤ To decrease the value of digits. ⑥ Revert /STOP/Restart Timer (For machine with timer use only) ⑦ To display process value, menu symbol and error code. ⑧...
- Page 4 Setting the Temperature (Continuous mode) Put the front switch on CONTINUES Turn on the temperature controller/power switch. The temperature displays light up and after a few seconds, the upper display shows the present value (PV) temperature. The lower display shows the set value (SV) or set temperature. Press to increase temperature gradually.
- Page 5 for 5 seconds to complete the low point calibration. A similar procedure is applied for high scale calibration. The two points OFTL and OFTH construct a straight line. For the purpose of accuracy, it is best to change the value same on the two points as possible. Auto-Tuning (only if needed) Instrument has been set the best PID value;...
Need help?
Do you have a question about the DFO Series and is the answer not in the manual?
Questions and answers