Advertisement
Quick Links
Circulation water baths
WBH-100/200
Operation manual
These units are circulation water baths for professional, industrial, or
educational use where the preparation or testing of materials is done at
approximately atmospheric pressure and no flammable, volatile or combustible
materials are being heated.
MRC LTD.
Hagavish 3 st.
HOLON 58817
ISRAEL
Tel (+972)-3-5595252
Fax (+972)-3-5594529
Email:
labm@mrclab.com
/
service@mrclab.com
Website:
www.mrclab.com
3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529
mrc@mrclab.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MRC WBH-100
Summary of Contents for MRC WBH-100
- Page 1 Circulation water baths WBH-100/200 Operation manual These units are circulation water baths for professional, industrial, or educational use where the preparation or testing of materials is done at approximately atmospheric pressure and no flammable, volatile or combustible materials are being heated.
- Page 2 • Do not position equipment in a manner that prohibits access to power cord. • Do not attempt to move the unit during operation or before the unit has been allowed to cool. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
-
Page 3: Receiving Your Unit
Once you have determined the unit is free from damage, locate the data label at the back of the unit. The data label indicates your unit’s model number and serial number. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 4: Installation
Allow a minimum of 10 cm between the unit and any walls or partitions that might obstruct free airflow. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... - Page 5 Units are cleaned at the factory, but not sterilized. Remove any racks if assembled and clean the bath with a disinfectant that is suitable for your application. See Maintenance Section for cleaning instructions and precautions. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 6 The cover must be used to reach set points above 60ºC. The bath cover is not designed to be airtight and create a pressurized environment. Internal bath components 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 7 Lamp flashes during auto-tuning operates ⑮ Lock indicator Setting parameter The PV display indicates the parameter symbol, and the SV display indicates the selected value of the selected parameter. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
-
Page 8: Operation
Never turn on the unit if the tank is empty from water or if the water level is too low 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... - Page 9 The two points OFTL and OFTH construct a straight line. For the purpose of accuracy, it is best to change the value same on the two points as possible. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
-
Page 10: Maintenance
4. Empty and clean the tank. 5. Please see Lifting and Handling for further instruction. 6. No maintenance is required on any of the electrical components. 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... - Page 11 Section 7 Wiring Diagram 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
Need help?
Do you have a question about the WBH-100 and is the answer not in the manual?
Questions and answers