Polycom RealPresence Collaboration Server 800s Quick Start Manual page 4

Hide thumbs Also See for RealPresence Collaboration Server 800s:

Table of Contents

Quick Start Guide

Polycom RealPresence Collaboration Server 800s Virtual Edition System

Don't turn on the server(s) at this time.

Connect the Polycom RealPresence Collaboration Server 800s system

server(s) to the network:

Connect a LAN cable between the leftmost Ethernet port (LAN1) and

the enterprise network.

This is the eth0 Management Network interface, which must be used

for this purpose.

Connect the second LAN cable between the second Ethernet port

(LAN2) to the network to be used for signaling and media traffic.

This is the eth1 network interface, which must be used for this

purpose.

Don't turn on the server(s) at this time.

Continue the installation and configuration process as described in the

Polycom RealPresence Collaboration Server 800s Getting Started Guide.

LAN 1 LAN 2

Polycom, Inc.

Table of Contents

Need help?

Do you have a question about the RealPresence Collaboration Server 800s and is the answer not in the manual?