Table of Contents
Advertisement
3
Splitter Configurations
Figure 15
Do not overtighten the fittings. One-eighth of a turn (about 15° clockwise from
C A U T I O N
finger-tight) is usually enough.
Disconnect tubing from the splitter
Loosen and remove the internal nut from the splitter fitting. Usually the
tubing and ferrule will fall out of the fitting.
36
Detector and column connections
Restrictor to
detector 3
Restrictor to
detector 2
Restrictor to
detector 1
To makeup
gas supply
Column in
Installation and Operation Guide
Advertisement
Table of Contents
