Checking The Gas Supply Tubing For Leaks; Spare Parts - Agilent Technologies 4107 User Manual

Checking the Gas Supply Tubing for Leaks

When any gas filter is changed, inspect all gas hoses. Replace any
hoses showing signs of damage or deterioration.
WARNING Eye Hazard
Pressurized gases pose a potential risk to sight. It is essential that
appropriate protective eyewear be worn at all times when maintaining gas
lines that may still be under pressure.
Pressurize the system and test all connections for leaks using a
commercial leak testing solution, a mild detergent, or an electronic
leak detector.
When changing air supply:




Spare Parts

For details on additional spare parts and consumables ordering
information not listed here, refer to the Agilent Technologies website:
www.agilent.com
The following is a list of recommended spares to keep on hand to
minimize down time during maintenance and repairs.
Agilent 4107 Nitrogen Generator User's Guide
check all gas supply hoses for leaks
using the air pressure gauge on the filter regulator unit, check the
air pressure meets the specifications listed in the Agilent MP-AES
Site Preparation Guide
ensure that shut-off valves are functioning correctly
Maintenance, Spare Parts and Troubleshooting
29