Interconnect Wiring; Power Requirements - SMC Networks IT Series Instruction Manual

1.6 INTERCONNECT WIRING

Not supplied with the sensor module, but necessary to the installation and operation is the multi conductor
wiring which connects the module to its power source and controller. Before this wiring is installed it is
important to read and understand the control system installation instructions to determine wiring requirements
and alternatives.

1.7 POWER REQUIREMENTS

modules operate on DC power between 10 VDC and 30 VDC. Regulated DC power must be supplied from
IT
a separate source, or from an approved Sentry or
Model 5100-02-IT Combustible Gas Sensor Module
Controller.
IT
Page: 6