Sp.10 Set Password; Sp.11 Communications - Toshiba JKSSS Series Instruction Manual

Medium voltage solid state starter
Table of Contents

Advertisement

Basic Installation and Operation
Guide
SP.10 Set Password (Setpoint Page 10)
(Security Level 3)
The soft starter has three levels of user programmable setpoint screens. Level one setpoints do not require a password
because the data contained in level one is basic nameplate data and starter control. Level two setpoint screens require a
three-digit password to configure the protection schemes. Level three setpoint screens require a four-digit password to
access the full range of protection and starter schemes.
MENU
Page 10
SECURITY SET
PASSWORD
SP10.1 Set Level 2 Password: This level uses a 3-digit password. The default level 2 password is 100.
SP10.2 Set Level 3 Password: Level three uses a 4-digit password. The default level 3 password is 1000.
SP.11Communications (Setpoint Page 11)
(Security Level 3)
SP11.1 Set Front Baud Rate: Configures the RS232 communications baud rate.
SP11.2 Set Modbus Baud Rate: Configures the Modbus communications baud rate
SP11.3 Modbus Address Number: Assigns a Modbus address to the unit.
SP11.4 Set Access Code: Assigns an access code to the Modbus addressing. This is typically not used
SP11.5 Set Link Baud Rate: Configures the RS422 communications baud rate between the keypad operator and the
CPU board (For applications with remote keypad only).
SP11.6 Remote Start/Stop: Allows the RS485 Modbus communications to start and stop the motor. Contact factory for
details.
MENU
(DOWN
ARROW 10
TIMES)
TOSHIBA
(DOWN ARROW 9 TIMES)
SET LEVEL 2
PASSWORD: 100
Range: 000 - 999
Page 11
COMMUNICATIONS
JKSSS Series Solid State Soft Starters
SET LEVEL 3
PASSWORD: 1000
Range: 0000 - 9999
SET FRONT BAUD
RATE: 9.6 KB/SEC
Range: 2.4, 4.8, 9.6,
19.2 38.4 KB/SEC
MODBUS ADDRESS
NUBBER: 247
Range: 1- 247
Increments of 1
SET LINK BAUD
RATE: 9.6 KB/SEC
Range: 2.4, 4.8, 9.6,
19.2 38.4 KB/SEC
SET MODBUS BAUD
RATE: 9.6 KB/SEC
Range: 2.4, 4.8, 9.6,
19.2 38.4 KB/SEC
SET ACCESS CODE
CODE: 1
Range: 1- 999
Increments of 1
REMOTE START/
STOP: DISABLED
Option: Enabled or
Disabled
67

Advertisement

Table of Contents
loading

Table of Contents